SEM 15363 Portola Red Vinyl Paint

The SEM 15363, Portola Red, Color Coat Vinyl Paint is designed to restore or change the color of vinyl, carpet, properly prepped and primed metal, velour, and plastic. It is used to refinish vehicle interiors and motorcycle seats. All Color Coats are very simple to use and quick to dry. They are very elastomeric and will not crack.

For the surface preparation, it is crucial to Clean, Clean, Clean!!! The surface being sprayed must be very clean. Use hot soapy water wherever possible. Use SEM 39362 SEM Soap to scrub the surface and rinse with water. Blow dry or towel dry, then clean the surface with SEM 38343 Vinyl Prep or SEM 38353 Plastic Prep. If the surface is not clean, the product will not stick.

For plastic surfaces, you will need to use a plastic adhesion promoter, such as SEM 39863 Flexible Bonding Clear or SEM 38363 Sand Free, and apply as per the manufacturer's instructions.

The Color Coat may then be applied in light, even coats. Several light coats, with 5-10 minutes between coats, work much better than one heavy coat.

For added protection or a change in sheen, apply one of Sem's clear coats: SEM 13003 High Gloss, SEM 13013 Satin Gloss, or SEM 13023 Low Luster.

The product will be dry to the touch in approximately 10 minutes. However, the substrate should not be subject to heavy abuse or abrasion for a minimum of 24 hours.

The SEM 15363, Portola Red, Color Coat Vinyl Paint covers approximately 10 square feet and is available in a 12 oz. aerosol can.

product information: